Lash Huns retention products

Knowing how to correctly prep your clients natural lashes is the key to maximum retention! So let's go through the products we use here at Lash Huns for maximum retention!

1. Ensure your client arrives with super clean natural lashes, this will make the prep routine faster as you won't need to spend time removing mascara or strip lash glue!

2. Firstly we recommend always doing a lash bath using Lash Huns Bubble Babe Lash Shampoo to start the treatment! This is a key step to ensuring maximum retention! Although your clients lashes may look clean, they may still have some access oils or makeup on them so we want to do a lash bath to ensure they are super clean before we get started! Even if your client has told you they have cleaned their lashes already today, I would still recommend doing it so you 100% know they're clean. We recommend doing this before both, full sets and infills.

3. Now, once you have taped down the bottom lashes using your Lash Huns sensitive tape you need to take a look at the clients natural lashes and decide wether or not you need to apply some primer! Not all clients need primer so it's important we know when to apply it and when to not. If your clients natural lashes look shiny this shows us that they have oily lashes. Primer is used to strip back any excess oils so that means if the clients lashes are shiny we need to apply some primer to prep the natural lashes ready for the treatment! If your clients lashes are more on the dull side the they don't have any excess oils on their natural lashes and we don't need to apply any primer.

4. Once you have completed your full set using your favourite Lash Huns adhesive, wait 2 minutes then apply your Lash Huns Fire Bond Super Bonder using a disposable lip brush or micro brush to the base of the extensions where the glue bonds are. Then use your Lash Huns mini fan to dry the Super Bonder.

5. Finally, take your Lash Huns Seal It Sis Sealant  using a disposable lip brush or micro brush to the base of the extensions where the glue bonds are. Then use your Lash Huns mini fan to dry the Sealant.